Townsedan body style poll

Which Townsedan body style do you have?

  • Total voters
    148
I have the documentation on the D vs caged nuts but I can't find it nor remember which had which. Also I don't have a Town Sedan but a Standard Fordor. Tag on fire wall says Briggs.
 
1929 Murray Bodied Town Sedan gas tank date 6-21-29 the wood is a mess but the sheet metal is very good. i guess I going to learn wood working.......
 
Henery 1.jpg
This is my 1929 Briggs getting an inspection.
 
Yeah I'm learning woodwork too. First thing I'd reccommend you do is go to a local saw mill a buy some 2' thick Ash planks. Not the nominal size 2" that's really 1 5/8", I mean 2'' on size. Next get a small Planer and a belt sander. I'm assuming you have a drill press, a table saw,and a vernier caliper. You'll probably figure out anything else you need as you go along! Take your old wood out very gently, You'll need it for patterns. I'm finishing the wood with 2 coats of polyurethane and a final coat of black paint. I took out the right side ( the worst) and I am using the left side as a pattern to reassemble. Once the right side is complete and fitted, I will go after the left side. I am going to be cutting another Ash log so if anyone near Quakertown, Pa is thinking of doing this, I will have a small amount of 2" planks for sale.
Terry






Dodge said:
1929 Murray Bodied Town Sedan gas tank date 6-21-29 the wood is a mess but the sheet metal is very good. i guess I going to learn wood working.......
Click to expand...
 
Ronnie,

Two things: First off you have a very nice car. And Second you are looking a little peakked:D. You may wan to see a doctor just to play it safe.

Mike
 
You must log in or register to reply here.
Back
Top