Third brake light?
- Thread starter rer_239
- Start date
Patrick L.
Well-known member
Yep.
Bruce of MN
Well-known member
I've see pix of taillights mounted on/in the spare wheel.
russcochiolo
Senior Member
1930artdeco
Well-known member
Russcochiolo,
How did you make that? Mine wobbles to much.
Mike
How did you make that? Mine wobbles to much.
Mike
russcochiolo
Senior Member
1930artdeco
Here are three photos showing the measurements. I first made the upright following the curve of the 6.50 x 15 tire, then shaped the curved part to match and then welded them together. The material was from the scrap pile. The 4th shows the backside and the cheap belts and the last with brakes applied. It may help to let some air out before attaching the belts and then re-inflate to stop wobbling./Users/williamcochiolo/Desktop/IMG_3341.jpg/Users/williamcochiolo/Desktop/IMG_3342.jpg
Here are three photos showing the measurements. I first made the upright following the curve of the 6.50 x 15 tire, then shaped the curved part to match and then welded them together. The material was from the scrap pile. The 4th shows the backside and the cheap belts and the last with brakes applied. It may help to let some air out before attaching the belts and then re-inflate to stop wobbling./Users/williamcochiolo/Desktop/IMG_3341.jpg/Users/williamcochiolo/Desktop/IMG_3342.jpg
Attachments
Last edited:
russcochiolo
Senior Member
These are the two left out. I hope that this works...I may have screwed up!
russcochiolo
Senior Member
In case this doesn't work the length is about 16".
