Things Not To Do

30ccpickup

30ccpickup

Well-known member
How many of us have learned things the hard way? Kevin in NJ answering a novice question, more or less posted, he never uses taps and dies on Model A parts. I too learned this the hard way. The tolerances are different. Do you have anything you have learned not to do, to pass on to others?

Paul
 
30ccpickup said:
How many of us have learned things the hard way? Kevin in NJ answering a novice question, more or less posted, he never uses taps and dies on Model A parts. I too learned this the hard way. The tolerances are different. Do you have anything you have learned not to do, to pass on to others?

Paul
Click to expand...

Yes, after I read on the internet that Al Gore invented the internet, I learned to NOT believe most of what I read on the internet.
 
Paul you are so right ...I didn't know there were thread chasers....just used taps and dies.....but I was young back then.... in my late 60's,
 
You can use adjustable dies! The one that have a little flex in themat wide open, they do a nice job of cleaning up the threads without removing stock. For nuts, I grind cutting edges into the front of an old ford bolt and screw the nut down on the bolt/stud. Not perfect, but better than nothing.
Terry
 
I've learned to not put something back together the way it came apart. Look at a diagram, its surprising what people leave off/out. The crank flange dowel pin retainer comes to mind, as just one.
 
I never use Silicone Sealer, I still curse myself when I come across silicone that I used 30 years ago on a differential or whatever.

Darryl in Fairbanks
 
I learned not to let go of the handle of a ratchett type hoist while lowering a motor in place. Especially while standing on a ladder and having your chin in range of the ratchett handle. Not sure how many times it hit me but still have the scar the A and the memory.
 
darrylkmc said:
I never use Silicone Sealer, I still curse myself when I come across silicone that I used 30 years ago on a differential or whatever.

Darryl in Fairbanks
Click to expand...

Sorry, I use clear silicone on gaskets all the time. I wipe off the excess asap. It seems to work good and makes for a clean install and disassembly when necessary.
 
Stretch Cab said:
I learned not to let go of the handle of a ratchett type hoist while lowering a motor in place. Especially while standing on a ladder and having your chin in range of the ratchett handle. Not sure how many times it hit me but still have the scar the A and the memory.
Click to expand...

Sounds like a Road Runner cartoon.:D:p

I learned to wear leather gloves when trying to remove a tire from a rim by using a hammer and chisel.:eek:
 
A short cheater bar in one hand and a hammer in the other is better than a long cheater bar in both hands.
 
Pete said:
Ah but it never leaked a drop in 30 years.
That's worth something.
Click to expand...
Yes, Pete, Most everything is a "trade off" of some sort. Saving $$$$ by NOT buying FLAVORED COFFEE CREAMER= REALLY crappy tastin' coffee!:eek:
Bill W.
 

Attachments

  • COFFEE.jpg
    COFFEE.jpg
    6.8 KB · Views: 6
One of the first repairs that I did as a 16 year old newbie on the Coupe fifty years ago was to remove the instrument panel to repair a leaking gas gauge.

As I removed the panel I saw the insulation on the wires was all frayed with bare wires exposed but before I could remove the battery cable, the short and resulting fire started.

My friend said that I made three trips to the tool box in panic before I found the correct sized wrench for the battery cable connector!

The only reason that the car did not burn down to the ground was that I had removed the floor boards so there was plenty of room to unhook the cable and avoid the smoke at the same time.

After installing a new wire harness the very next thing I installed was a fuse box from a VW bug. There were no fuse accessories for the Model A available that I knew about in 1963.

Good idea to remove a battery cable when working on the dash panel or have a fuse installed on your A.
 
I have a spare oil pan dipper tray that has four 3/32 holes drilled at the lowest point of each reservoir; this I don't understand.
Never just swedge the oil pan drain plug insert onto the oil pan. They will eventually slip when trying to remove the drain plug; just my experience.
Chet
 
I have learned to be careful about making any major component changes (perceived improvements) just before leaving on a road trip. A failure of an untested component has caught up with me a couple times while on the road. I guess the following applies: Don't fix it if it ain't broke.....

Good Day!
 
You must log in or register to reply here.
Back
Top