tail light bracket mounting

B

banjobrad

Member
Does anybody have the dimensions for mounting the tail light
brakets on the rear fenders (obviously).
Maybe a dimension from the quarterpanel surface to the center
of the top of the bracket and a dimension from the lower edge
of the fender to the approximate center of the 3 hole pattern.
Hopefully someone has an original factory punched fender or
knows that it's in the correct location. I have a 29 Roadster.
Sure would appreciate the help. Thanks

B.G.
 
Your best bet is to make your own measurements from a 29 Coupe or Roadster rear fender; surely someone in your club must have an original fender ? This way you will be positive about the location. Just my opinion,

Ron
 
You can get the top hole dimensions from another fender. Don't drill the lower holes until you have the fenders bolted to the car so you can put a carpenter's level on the license bracket to make sure it's level. Same on right.
 
You must log in or register to reply here.
Back
Top