T5 adapter

usered

usered

Senior Member
Are there any other companies, besides Speedway that offer an adapter kit for a T5 transmission to a 59a (38) flathead using a hydraulic throw out bearing?

I'm having trouble getting good answers as if this is even possible.
 
depends on the T-5 all T-5's made after 92 have the Ford bolt pattern, they also have better ratios.
 
I have kits for the 85-92 (Chevy Bolt pattern) and 93 up S-10 T5 trans (Ford bolt pattern). I also have a slave cylinder assembly that bolts to the side of the trans. keeps the hydraulic fluids on the outside of the bellhousing. Many times I can provide the parts to hook to your stock clutch linkage. Been selling these kits for almost 20 years. Call 402-749-1932 with questions. Gary at Cornhusker Rod And Custom
 
Last edited:
I can vouch for Gary's adapter kit. It's honestly everything you need to mate the T5 to your flathead.

I'm running a 85-92 trans with Gary's adapter kit, disk and pressure plate, as well as the slave cylinder assembly. I put over 6000 miles on the car last year, and continue to rack the miles up this year, with out any problems.
 
I just got a steel bell from Quick-Time. I think they are a Lakewood company.
They have bellhousings to mate just about anything to anything.
SFI approved. Got mine for a late flathead to TKO 5 speed.
May have to get w/Gary about the hydro slave setup.
I'm a newbie here.
 
Last edited:
usered said:
Are there any other companies, besides Speedway that offer an adapter kit for a T5 transmission to a 59a (38) flathead using a hydraulic throw out bearing?

I'm having trouble getting good answers as if this is even possible.
Click to expand...

Good answers are sometimes difficult to get and since no one has answered your question yet, I did a simple google search and came up with a couple hundred hits.
The answer to your question is, yes.
Here is one place to look.
http://compare.ebay.com/like/360569093431?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar
 
You must log in or register to reply here.
Back
Top