T front spring

Dusty12682

Junior Member
I need some help getting a front spring for the T. I would prefer something cheap, does anyone know of a front leaf spring that will fit the T that won't break the bank?

Sent from my SM-N960U using Tapatalk
 
The ones I see are much more expensive, and as I am building a speedster, so I'm going low.

Sent from my SM-N960U using Tapatalk
 
I'll look there, most of the ones I see are 300 and up. Thanks! By the way... What is the spring from eye to eye for a 18 to 25 front axle?

Sent from my SM-N960U using Tapatalk
 
Not sure were you are located Mr. Dusty but I got my springs from a fella in W Hartford Conn who builds a very nice model T front and rear spring. www.t-springs.com

There are some reasons I would avoid fleabay for leaf spring, there on there for a reason CRAP. I would check MTFCA or your local craigslist, I do see in large parts sell offs.

Again where your building a speedster and have measurement questions I would contact "T" springs and could probably build you a proper spring for your application. Good luck and let us know how you make out.
 
Last edited:
Not sure were you are located Mr. Dusty but I got my springs from a fella in W Hartford Conn who builds a very nice model T font and rear spring. www.t-springs.com

There are some reasons I would avoid fleabay for leaf spring, there on there for a reason CRAP. I would check MTFCA or your local craigslist, I do see in large parts sell offs.

Again were your building a speedster and have measurement questions I would contact "T" springs and could probably build you a proper spring for your application. Good luck and let us know how you make out.
Cool! Thanks! I am very happy to accept all advice, and this is awesome! Luckily I'm only in need of a front, the rear is 4 quarter elliptical springs. Here is my build: https://r.tapatalk.com/shareLink/to...hare_fid=1039079&share_type=t&link_source=app
2d6b288e0c54a5ff6c90324c015a9c9e.jpg


Sent from my SM-N960U using Tapatalk
 
Back
Top