Subrail Picture

[goleafsgo_12]

Does anybody have pictures of their sub rails in this location? (see picture) I want to know if the patch panel I need to make is just a straight piece that matches with both sides, or if there are any other bend lines/ holes/ etc that I should be aware of. Somebody has cut this rail and put in a piece of square tubing to stiffen that section..

Thanks.

 

[Dennis Pereira]

Here's a 1929 standard coupe or at least the start of one.

 

[George]

Here is a picture of a 30 roadster that I am building.

 

[Craig Lewis]

31 coupe subframe. Sorry haven't got a closeup handy, but could get one tomorrow if you're still stuck.

 

[goleafsgo_12]

Hmm.. Any closer shots? I can't tell if there is a hump just after the rear cross channel or not that I need to incorporate. I lightened and blew up craig's photo but the resolution is too small to see any details.

 

[Craig Lewis]

Here's my crusty original ...probably your best referance.
Let me know if this doesn't show the right area.
Good luck.

 

[Grapejuice]

Here is the rusty original piece next to the replacement piece for my '29 Special Coupe.

 

[goleafsgo_12]

Cool thanks for your help everyone.