All it took was a search of the archives to find this and it worked perfectly! See post #3 here:
http://www.fordbarn.com/forum/showthread.php?t=80463&highlight=hinge+pins
I used a 12" bit (Lowes -- cheaper than Home Depot) and clamped a straight edge to the back of the hinge so my wife could watch the angles and give me corrections. I jacked up the back of the door to relieve any steps in the pin and it almost fell out when I hit it with a punch.
Lonnie
http://www.fordbarn.com/forum/showthread.php?t=80463&highlight=hinge+pins
I used a 12" bit (Lowes -- cheaper than Home Depot) and clamped a straight edge to the back of the hinge so my wife could watch the angles and give me corrections. I jacked up the back of the door to relieve any steps in the pin and it almost fell out when I hit it with a punch.
Lonnie