stone guard

ford31

ford31

Senior Member
lookng for stone guard for my doodle bug has 28 29 shell,shiny chrome not what am looking for panited, rust ok
 
you can use flattened expanded steel using some wire to hang it from the radiator wings that hold the shell. mild steel is pretty cheap and will rust up nicely. I found 18 ga x.5in opening($13+ship for a 24inx24in) is a really good fit you can fit up to 13 ga but it will be tight tight. measure to make sure but I believe you will need 20x20 for a 28-29. for anyone has a 30 31 its 22x18 on the radiator face. online metals was the only place i found a good price on single pieces. https://www.onlinemetals.com/en/buy/hot-roll-steel-expanded
 
Are there any Black stone guards out there or are the all brite work; SS or chrome?

Will powder coating or other paint process stick to a chrome or SS stone guards?

Might have to look into the expanded steel thing but was hoping for a simple solution.
 
DNLs1930 said:
Are there any Black stone guards out there or are the all brite work; SS or chrome?

Will powder coating or other paint process stick to a chrome or SS stone guards?

Might have to look into the expanded steel thing but was hoping for a simple solution.
Click to expand...

Yes, powder applied paint, -or even a 2k urethane paint will stick to stainless (-or Chrome) providing it is etched. I would mediablast the stone guard to etch the surface, then spray a good quality 2k epoxy and allow it to flash dry. Follow-up with a good quality 2k urethane paint and you should be good to go.
 
You must log in or register to reply here.
Back
Top