Steering Stem Bearings

Jwawhite

Well-known member
How does one ascertain if there is an issue? Will be pulling steering wheel in the future and the bearing is at the top? Is there a lower bearing?
In motorbikes when a steering stem bearing is bad there is a notchiness.
SOME- times while turning left only I feel a notchiness in the movement a few turns in. Starts and stops while turning the wheel.
Anyone with experience on this?
 
I would bet your “notchiness” is in the gear on your shaft... these had a tendency to wear badly. See my rebuild on my hotrodreverend.com website. The blog page is searchable by tag words.
 
Steering boxes & their gears were upgraded during '56, for improved longevity.
The early versions are 'two tooth' and the later ones are 'three tooth', as seen on the sector gear.
An increase in wear surface area helped them last longer.
 

Attachments

  • '55-'56 steering box, top c.jpg
    '55-'56 steering box, top c.jpg
    60.3 KB · Views: 9
  • two tooth sector gear (not Ford ).jpg
    two tooth sector gear (not Ford ).jpg
    46.8 KB · Views: 8
  • example steering box, 3 tooth sector gear.jpg
    example steering box, 3 tooth sector gear.jpg
    14.5 KB · Views: 11
  • 56-57 steering box, top c.jpg
    56-57 steering box, top c.jpg
    52 KB · Views: 9
  • '57 Ford three-tooth steering box.jpg
    '57 Ford three-tooth steering box.jpg
    30.8 KB · Views: 10
Last edited:
Back
Top