steering box id

have the same question. this might help. what do i have here, f1 or f100?
 

Attachments

  • !B2yj3,!B2k~$(KGrHqMOKjUEyKdE3iQkBMj5(QNBzg~~_12.jpg
    !B2yj3,!B2k~$(KGrHqMOKjUEyKdE3iQkBMj5(QNBzg~~_12.jpg
    31.4 KB · Views: 40
  • !B2yj6tQ!Wk~$(KGrHqIOKjoEyNNyB++oBMj5(,MKw!~~_12.jpg
    !B2yj6tQ!Wk~$(KGrHqIOKjoEyNNyB++oBMj5(,MKw!~~_12.jpg
    35.5 KB · Views: 35
  • !B2yj9)!BGk~$(KGrHqMOKjsEyN8Lzf8GBMj5(infgw~~_12.jpg
    !B2yj9)!BGk~$(KGrHqMOKjsEyN8Lzf8GBMj5(infgw~~_12.jpg
    27 KB · Views: 32
The steering box in the pic looks like an F1 with a modified flange welded on.

When is position, the F1 worm is BELOW the pitman shaft, the F100 is ABOVE the pitman shaft.

Here is a shot of the F1 box (with modified flange) in my 32 Sedan. Note the worm is underslung - ie below the pitman shaft. You will also note the stock 32 pitman arm fits the F1 box.

steeringbox001.jpg


The F100 box has a bigger shaft and the pitman arm has a clamp bolt.

Mart.

Edit: I see the filler plug location is slightly different. From this I would say the box shown is not F100 for sure, but is similar to my F1 box. From the orientation of the bolts, it may have been made for a 33/34 rather than a 32.
 
Last edited:
Back
Top