Starter bushing, brush end

[charles in east texas]

Where do you fellows buy your bushings for the end plate with the brushes for a model A ford. I've had no luck with the ones from a vender. Thanks, charles

 

[Mike V. Florida]

Mikes a fordable, http://www.mikes-afordable.com/product/A11052.html

 

[Tom Wesenberg]

Unless it's actually worn out there is no need to replace it. Total time on a starter is very little and the rear bushing has very little load on it. That said, if I had to replace the bushing (I've only had to do a couple) I either bought it from Bert's, Bratton's, or Snyder's, and it fit fine.

I also have a very good seal and bearing store about 5 miles away where I can buy parts if I need to.

 

[charles in east texas]

Tom and others, I bought 3 from one of the venders mentioned above and had no luck with them. Maybe need to try a different one. Thanks for the help guys.

 

[Tom Wesenberg]

Tom and others, I bought 3 from one of the venders mentioned above and had no luck with them. Maybe need to try a different one. Thanks for the help guys.

There were two sizes available (see Service Bulletins), but the parts houses only have one.

 

[Chuck Sea/Tac]

What's the discrepancy?

 

[charles in east texas]

So that's where the problem lies, Tom.
Charles