Starter brushes

[bob from red oak]

Any suggestions for holding back starter brushes so end cap will go back on starter.

 

[slowforty]

Used to tie it back with a piece of string. Cut the string when done.

 

[cadillac512]

Pull the springs back and **** them to the side so they are not pushing on the brushes. Then install the end cap followed by repositioning the springs.

 

[rotorwrench]

I have a hook tool to pull the spring back and then just pull the brushes out. They can be finicky going back in but it's never been a problem for me.

 

[19Fordy]

bob: Here's how I did it. Be sure to read all the "posts" for valuable info. you might need to know.
https://www.fordbarn.com/forum/showthread.php?t=211141&highlight=convert+starter+12v