stainless bolts

Alaska Jim

Alaska Jim

Well-known member
Hi guys, awhile back I remember seeing a post on stainless steel bolt kits for Y blocks. I can't remember if it was here on the barn or if it was over on the hamb. I believe it was said that arp does not make a complete kit, but that some one does. I had it bookmarked on my other computer, but it took a crap , and I lost all my info. I am hoping someone here can direct me to the source. Thanks for any help anyone can supply.----Jim
 
I bought a set from them for my 292. If you can give them any bolt measurements for something specific you need; power steering or alternator conversion, etc... that might not be included in their generic kits I believe they will work with you on it.

I did notice the flat washers they included for the oil pan bolts had too big of an OD and wouldn't sit flat, so I couldn't use them. The washers that were on the old pan bolts were a smaller split lock washer, I swapped in some shiny new ones from the hardware store.
The socket head exhaust manif bolts in the engine kit seem too short to me so it wouldn't hurt to double check the length of those also. I suspect they're for headers, not cast iron manifolds.
They've been helpful and easy to work with so far.
Good luck with your project.

Y-Block engine bolt kits on their website...
https://alloyboltz.com/catalog/index.php?cPath=39_73_77_201&osCsid=13ocrrtvafbefpcdu5i1mvjgt1

A link to their current Y-Block listings on ebay...
http://www.ebay.com/sch/i.html?_fro...ts.TRS0&_nkw=y-block+stainless+bolts&_sacat=0


.
 
Last edited:
You must log in or register to reply here.
Back
Top