Special electrical charger needed...

[Steve Plucker]

Where may I find a charger that I can regulate the Voltage and Amprage?

Looking for something that will give me at least 2-3 Volts and 2-3 Amps.

So far Harbor Fright, Grainger, and NAPA can not help.

Been trying the internet but with no luck.

Thanks.

Pluck

 

[nhusa]

Check Amazon -
I got a great solid state 6 volt to 12 volt convertor so I could us 12 V LED stop lights on my Model A. Since the A was positive ground all I needed to do was make sure the wiring was correct for the LEDs.

 

[ryanheacox]

A laboratory power supply might do what you want. https://www.jameco.com/z/LABPS3003S...oratory-DC-Power-Supply-with-LCD_2245503.html

 

[30 Closed Cab PU]

A laboratory power supply might do what you want. https://www.jameco.com/z/LABPS3003S...oratory-DC-Power-Supply-with-LCD_2245503.html

x2, I agree.. You are looking for a variable voltage power supply with separate.variable current liming. I have not seen a battery charger that has both of these features.


Perhaps EBay, swap meets, or some other place that sells used equipment. Look under DC power supplies, or variable DC power supplies.

 

[GPierce]

Google variable voltage power supply.
https://flash.newegg.com/Product/9S...VFdtkCh2Jpw5QEAQYByABEgIp5fD_BwE&gclsrc=aw.ds

 

[jbond]

Caswell.com has a power supply for plating.
https://www.caswellplating.com/electroplating-anodizing/power-supplies.html

 

[Pete]

Try this on eBay.
#222410060720

 

[Smooth_One]

I use one of these on my car. I know it’s just a tender but it works great and it auto detects between 6V and 12V.

 

[Steve Plucker]

Thank you guys...a variable voltage power supply is what I needed.

Hope it works.

Pluck