Serpentine System for Flatheads

It's starting to look like it can be figured out. The hardest part might end up being the sourcing of appropriate serpentine pulleys. I actually looks like the biggest hurdle might be just finding a crank and water pump pulleys that can be made to work.
 
I just made one for a friends project. I don't like v belts for street engines. It does help having the machines to make whatever parts you need. This is for a woman and she wanted AC, PS, and and alternator so this is how I configured it.
 

Attachments

  • IMG_0103.JPG
    IMG_0103.JPG
    73.7 KB · Views: 123
Robert61 said:
I just made one for a friends project. I don't like v belts for street engines. It does help having the machines to make whatever parts you need. This is for a woman and she wanted AC, PS, and and alternator so this is how I configured it.
Click to expand...

Very nice work . . . just not my style (given the vintage nature of flatheads). But - if somebody wants all those accessories, then this is a good way to go to drive them all and not have belt issues.
 
Veeerrry impressive setup. It would look even better on a "Street Rod" site. People, I think we are starting to loose our focus.
 
Serpentine belts squeak too. I have had much more squeaking on my two 97 T Birds and my diesel pusher. A serpentine system is no cure for squeaking belts.
 
>>>Serpentine belts squeak too. I have had much more squeaking on my two 97 T Birds and my diesel pusher. A serpentine system is no cure for squeaking belts.>>>


Much more? What kind of belts did they have before? And what are 97 T-Birds and a diesel pusher? Jack E/NJ
 
Robert, that's some fantastic work. What are you doing for water pumps? It looks like the normal dual flathead pumps are not there. Must be something I'm unfamiliar with.
 
I used an ugh, 409 chevy water pump. I wanted the system pressurized with a modern sealed type water pump. Plus I couldn't put the accessories on the owner wanted with twin water pumps. Krylon 32 used to make a setup like this but I adapted it further to incorporate the AC and PS mounts.
 
Please whatever you do dont use a chain on a blower. Ya, I know there are examples from the past.
 

Attachments

  • Screen Shot 2020-02-24 at 7.55.32 PM.jpg
    Screen Shot 2020-02-24 at 7.55.32 PM.jpg
    17.9 KB · Views: 69
Jack E/NJ said:
>>>Serpentine belts squeak too. I have had much more squeaking on my two 97 T Birds and my diesel pusher. A serpentine system is no cure for squeaking belts.>>>


Much more? What kind of belts did they have before? And what are 97 T-Birds and a diesel pusher? Jack E/NJ
Click to expand...

Original was serpentine squeekers.
 
I had an old ATI super damper that the hole was worn out in, for a small block chevy. I bored the hole to fit the flathead and used a small block pulley.
 
message from apba12m>>do you have any better pic of idler attachment to block? thanks Lou>>
Radiator blocks a better pic. But here's a drawing of my setup for better wrap with 2 skateboard wheels mounted on a 1/4" bar. The bar itself is mounted on the generator/alternator stud. Another small bolt locks bar in place. Should be mounted as low as possible for best wrap but without interfering with distributor or spark plug wires.
422209




573021

 

Attachments

  • fanbeltwrap-1.jpg
    fanbeltwrap-1.jpg
    37.2 KB · Views: 82
You must log in or register to reply here.
Back
Top