Sending unit rebuild

T

TNDoug

Senior Member
Does anyone rebuild or repair the King Seely fuel sending unit? I have 2 that don't work (just bought one that was supposed to work properly and doesn't). I've done all the tests and the issue is the sending unit. I also have some gauges to repair. Not interested in trying to make the repops work.
 
TNDoug said:
Does anyone rebuild or repair the King Seely fuel sending unit? I have 2 that don't work (just bought one that was supposed to work properly and doesn't). I've done all the tests and the issue is the sending unit. I also have some gauges to repair. Not interested in trying to make the repops work.
Click to expand...



I used Bob's Speedometer. The web site is, bobsspeedometer.com


Sent from my iPad using Tapatalk
 
You might pop the cap off the sending unit and check the condition of the bi-metallic strip, the little set of points, plus the internal wiring & calibration coil. If the strip or points are damaged, you may have to keep looking for a better part. Sometimes the little points just need to be cleaned but you have to be careful with them. They are very small and delicate. It's a wonder that they last as well as they do. There are many of them out there that still function normally after so many years. King Seeley made a good product.
 
TNDoug said:
Does anyone rebuild or repair the King Seely fuel sending unit? I have 2 that don't work (just bought one that was supposed to work properly and doesn't). I've done all the tests and the issue is the sending unit. I also have some gauges to repair. Not interested in trying to make the repops work.
Click to expand...

I'm told that Baxter repairs them. Anyone have experience with his rebuild? I also have one that need repair. Ken

Baxter Ford Parts

Auto Parts Store · Pinckney


Address: 131 Arkansas St, Lawrence, KS 66044


Phone: (785) 842-9256
 
You must log in or register to reply here.
Back
Top