I don't know why I didn't of this before I just replaced all the brakes on my '59 Galaxie but is it worthwhile to go back and add self adjusters now? How much trouble is it? On a car that will not really be driven a lot how often will I have to adjust them anyway.
I put self adjusters on my '54. Not sure about '59 Galaxie but mine went on effortlessly. The only mod I had to make was to cut new access holes in the front backing plates for the star wheels. Original holes didn't line up.
![]()
![]()
The front brake shoes, hardware kit, studs and drums are for a '68 Mustang
The access holes on the rear backing plates were about 1/4" off but still allowed access to the star wheels. The front brake shoes, hardware kit, studs and drums are for a '68 Mustang. Perfect fit. Everything bolted right on except for having to make the extra access hole for the star wheels in the '54 backing plates. Pretty common practice on '52-'54 Fords.
... and BTW, here's the rear replacement drum for '52-'54 Ford stock rearends.
Comes off a '70 Ford Econoline van......
Rear replacement drum
I put self adjusters on my 56 Bird. While the numbers for a 59 sedan may be different (different size brakes) there was two mods that I had to make. The first is the odd shaped piece that holds the shoes at the top. It has to be thinner to account for the thickness of the adjuster cable eyelet. The second was the access to the star wheel on the LEFT side - both front and back. You have to make a second slot to access the star wheel. Not a big thing to do - just mark where it should be, drill a hole and elongate it with a tool like a Dremel. I made it the same size as factory so a regular plug will fit
To what extent the 59 sedan is different from a 56 TBird, I don't know. Didn't have to buy new shoes as the old ones had the correct holes.
I put self adjusters on my 56 Bird. The first is the odd shaped piece that holds the shoes at the top. It has to be thinner to account for the thickness of the adjuster cable eyelet. The second was the access to the star wheel on the LEFT side - both front and back. You have to make a second slot to access the star wheel. Not a big thing to do - just mark where it should be, drill a hole and elongate it with a tool like a Dremel. I made it the same size as factory so a regular plug will fit.