S/W Rear Bumpers

W

woodlot1

Member
Can anyone help me on the dimensions of the rear bumper arms, I need total length of the arms. From the end that attaches to the frame to the tip of arm where it attaches to the bumperetts.
Thank you .
 
The rear bumper arm on my 5/31 SWTS measures approximately 40". It has 4 holes behind the rear body support and the bumper end is rounded not square cut.
 
Bill,
Could you measure the bracket that attaches to the arm and the underside of the body , it is possible it is 4 to 5 inches tall.
Thank you,
Paul
 
Tom the Victoria`s rear bumper irons and bumper end brackets are shorter then the SW four door. and the SW has different bumperets.
 
Paul
The rear body support brackets on my 160B's rear bumper arms are 5-3/8" from the body to below the rivet.
Bill
 
You must log in or register to reply here.
Back
Top