Drive Shaft Dave
Well-known member
What bolts should be used at the front of the running board to the rear of the fender? 30 coupe .early.
running board bolts
- Thread starter Drive Shaft Dave
- Start date
Bill Cilker
Senior Member
Dave
January through September 1930 - Bolts were 5/16”-18 x 3/4", Bolts heads were 7/16” hex (3/8” hex used on occasion).
January through September 1930 - Bolts were 5/16”-18 x 3/4", Bolts heads were 7/16” hex (3/8” hex used on occasion).
Drive Shaft Dave
Well-known member
Thanks, Bill.