- City
- denver
- State
- colorado
- Price
- 1000
When I got this motor I inspected the bottom end, lifter valley, and pulled off the heads to ensure everything was in good shape. Almost no sludge or crud in the motor upon inspection, I have some pictures available when I had it apart. Valve train and rotating assembly moves without issue (no stuck valves with video available)
New ford head gaskets and intake gaskets plus a new cap, rotor, and condenser, plus, and wires.
I have a short video available of the motor lighting off however I don't think the carb was getting fuel as it would only fire up when pouring a small amount of gas down the carb.
Planned on putting it in my model A.
Asking $900 or best offer for a clean desirable flathead in good shape that just needs to be dropped into your project.
It should be noted that the carb and fuel delivery are off another motor and not included in the sale. If the price is right I can include a fuel pump and maybe a carb. Other than that I will include anything specific to the motor that I have.
Call/text/email for more details.
mike: (720)-364-3955
the51merc@hotmail.com
New ford head gaskets and intake gaskets plus a new cap, rotor, and condenser, plus, and wires.
I have a short video available of the motor lighting off however I don't think the carb was getting fuel as it would only fire up when pouring a small amount of gas down the carb.
Planned on putting it in my model A.
Asking $900 or best offer for a clean desirable flathead in good shape that just needs to be dropped into your project.
It should be noted that the carb and fuel delivery are off another motor and not included in the sale. If the price is right I can include a fuel pump and maybe a carb. Other than that I will include anything specific to the motor that I have.
Call/text/email for more details.
mike: (720)-364-3955
the51merc@hotmail.com
Attachments
Last edited: