V vern hodgson Well-known member Jun 1, 2021 #1 Have a 29 special coupe, hard turn causes rubbing on front tire, all stock, 21” tires. Any thoughts?
midgetracer Well-known member Jun 1, 2021 #2 Tire is probably hitting the brake rods. It could be that the tires are oversize. Firestones are a bit oversized. you could fix it by putting a washer under the stops on the axle.
Tire is probably hitting the brake rods. It could be that the tires are oversize. Firestones are a bit oversized. you could fix it by putting a washer under the stops on the axle.
Gary WA Well-known member Jun 1, 2021 #3 Dont do any hard turns! Attachments walter dripping nose.jpg 19 KB · Views: 8
Ak Sourdough Senior Member Jun 2, 2021 #5 My Coker 21" radials are substantially larger than the multiple brands of bias rags I took off. They rub just a little in a tight turn.
My Coker 21" radials are substantially larger than the multiple brands of bias rags I took off. They rub just a little in a tight turn.
BRENT in 10-uh-C Well-known member Jun 2, 2021 #6 katy said: Are the stop nuts on the front or rear of the axle? Click to expand... This ^^^. Also, make sure they are the correct length and are touching the spindle.
katy said: Are the stop nuts on the front or rear of the axle? Click to expand... This ^^^. Also, make sure they are the correct length and are touching the spindle.