Clem Clement
Well-known member
He was always so kind and willing to help me and provide what was correct for me. What a great asset tour hobby. He'll be fixing nuts and bolt on the Golden Chariot now.
Clem
Clem
Roy Nacewicz
- Thread starter 35fordtn
- Start date
1937sedandelivery
Senior Member
Everybody is so right on with Roy. I dare to say that there is no other person that embodies the virtues, unselfishness, generosity, patience, knowledge, kindness,...and humanity that Roy shared with us all. God Bless. I want him back.
Short story:
A couple weeks ago I was talking/emailing with him on my 37 Sedan Delivery. I had some very unique, specific questions regarding some interior rear trim moldings and how they fastened to some of the inside framing/steel. So much detail I was needing..."Hey Roy, there is a small hole in framing steel that the vertical trim pieces fasten to. It is at the very bottom of the trim. Do you know what the stock mounting is?"...….."Roy, I believe it is a small #8-32 screw and threaded hole in the steel piece. Not sure because it has been over 30 years since I worked on my 37 SD."
Lo and behold, I go to get a closer look at mine and voila!, it indeed is that screw size. Damn, what a mind he had for detail.
Call me selfish, but I want him back....
Love to Roy and Family.
Short story:
A couple weeks ago I was talking/emailing with him on my 37 Sedan Delivery. I had some very unique, specific questions regarding some interior rear trim moldings and how they fastened to some of the inside framing/steel. So much detail I was needing..."Hey Roy, there is a small hole in framing steel that the vertical trim pieces fasten to. It is at the very bottom of the trim. Do you know what the stock mounting is?"...….."Roy, I believe it is a small #8-32 screw and threaded hole in the steel piece. Not sure because it has been over 30 years since I worked on my 37 SD."
Lo and behold, I go to get a closer look at mine and voila!, it indeed is that screw size. Damn, what a mind he had for detail.
Call me selfish, but I want him back....
Love to Roy and Family.
Mike in Mass
Well-known member
Prayers to his family. I will miss him and his knowledge. Wow ,I cant believe it .
It has taken me a few days to respond to my son's posting. I have few friends I feel as close to as Roy. He was my mentor in the V-8 hobby as well as one of the most valuable sources of knowledge when it comes to correctly restoring these Henry Ford's.
I first called and talk with Roy around 1988 when I was restoring my 35 coupe and was trying to get the correct dash paint. Roy had 36 but not the 35, however a short time later he sent me the correct one free of charge for my input. That's the way Roy was, always encouraging me to go beyond in detailing my show car. When I finally thought I had it complete he graciously came down to Tennessee with his son and found only 63 things incorrect in the assembly. Some would be upset but this allowed me correct them before the V-8 Nationals and win my Dearborn award. No telling how many Dearborn Awards Roy 's knowledge and fastener kits have been responsible for!
I started going to Hershey that following year working in Roy's tent helping him sell those kits and continued ever year after. Hershey will not be the same without Roy's diet Cokes and daily talks. My son was fortunate to get tutoring from Roy's knowledge from his kid years right up to weekly phone calls as he started his parts business. I know he was one of his heros! Rest in Peace dear friend and prayers be with your family and friends in this hobby!!!
I first called and talk with Roy around 1988 when I was restoring my 35 coupe and was trying to get the correct dash paint. Roy had 36 but not the 35, however a short time later he sent me the correct one free of charge for my input. That's the way Roy was, always encouraging me to go beyond in detailing my show car. When I finally thought I had it complete he graciously came down to Tennessee with his son and found only 63 things incorrect in the assembly. Some would be upset but this allowed me correct them before the V-8 Nationals and win my Dearborn award. No telling how many Dearborn Awards Roy 's knowledge and fastener kits have been responsible for!
I started going to Hershey that following year working in Roy's tent helping him sell those kits and continued ever year after. Hershey will not be the same without Roy's diet Cokes and daily talks. My son was fortunate to get tutoring from Roy's knowledge from his kid years right up to weekly phone calls as he started his parts business. I know he was one of his heros! Rest in Peace dear friend and prayers be with your family and friends in this hobby!!!
FlatheadTed
Well-known member
So sudden ,RIP ,just to add ,Very impressed with the dedication to the hobby with that photo of the 32 Delivery,
Last edited:
mercman from oz
Well-known member
I received this email from a friend describing Roy, and I thought that I would share it, as it sums up the type of guy Roy was.
"This is a big loss not only to Roy’s family but the Early Ford V8 family as well. Roy was a wealth of information, who would share it in his unique way, and will be greatly missed especially those of us who go deep on details. Roy was a long-time Ford employee and he told me of spending his lunch time in the Ford archives looking for all sorts of information. I learned a great deal about searching the archives from Roy and he helped me better understand Ford, the part numbering system and all about Ford nuts, bolts, hardware and all the original parts and pieces needed for a quality restoration. I was fortunate to have spent time with him in his warehouse-reproduction factory-office in Michigan, sat down many times to “rest my feet” at his Hershey space and talk Ford parts. I remember his eyes lighting up when I brought up the subject of trying to find the right split rivets for holding anti-squeak material to sheet metal parts, yep, that was his thing too. He was very patient with me so many times on the phone when I had seeming arcane details related to my restoration. He would share his opinion but also freely admit when he didn’t know the answer. Roy was instrumental in getting permission and organizing the backroom tour of the Ford archives in Dearborn at the Grand National Meet – a real treat for me to attend. I also appreciated the level of correctness in all his reproduction parts. Gas lines he made were copper-plated steel, just like Ford made. He relayed a story to me about having to go down to the very worst sections of Detroit to pick up a batch of gas lines from the plater he used and worrying about his personal safety and wondering if his car would survive the all-consuming pot holes. He wouldn’t send any of his employees to the platers, so that tells you something about his character. Another little known fact is that he arranged for special treatment for all of his hardware with black-oxide coating. He specified that the plater had to run the hardware through the process a total of three times to attain the quality finish that he demanded and much like what Ford produced in the EFV8 years. He said he did enough business with them that he was able to get this special treatment. He did present a bit of a cantankerous facade and he smoked like a chimney, but once past those traits, he was a great person to know and a real treasure. I can’t imagine how much knowledge went with him and hope his spirit and philosophy of reproduction parts continues."
"This is a big loss not only to Roy’s family but the Early Ford V8 family as well. Roy was a wealth of information, who would share it in his unique way, and will be greatly missed especially those of us who go deep on details. Roy was a long-time Ford employee and he told me of spending his lunch time in the Ford archives looking for all sorts of information. I learned a great deal about searching the archives from Roy and he helped me better understand Ford, the part numbering system and all about Ford nuts, bolts, hardware and all the original parts and pieces needed for a quality restoration. I was fortunate to have spent time with him in his warehouse-reproduction factory-office in Michigan, sat down many times to “rest my feet” at his Hershey space and talk Ford parts. I remember his eyes lighting up when I brought up the subject of trying to find the right split rivets for holding anti-squeak material to sheet metal parts, yep, that was his thing too. He was very patient with me so many times on the phone when I had seeming arcane details related to my restoration. He would share his opinion but also freely admit when he didn’t know the answer. Roy was instrumental in getting permission and organizing the backroom tour of the Ford archives in Dearborn at the Grand National Meet – a real treat for me to attend. I also appreciated the level of correctness in all his reproduction parts. Gas lines he made were copper-plated steel, just like Ford made. He relayed a story to me about having to go down to the very worst sections of Detroit to pick up a batch of gas lines from the plater he used and worrying about his personal safety and wondering if his car would survive the all-consuming pot holes. He wouldn’t send any of his employees to the platers, so that tells you something about his character. Another little known fact is that he arranged for special treatment for all of his hardware with black-oxide coating. He specified that the plater had to run the hardware through the process a total of three times to attain the quality finish that he demanded and much like what Ford produced in the EFV8 years. He said he did enough business with them that he was able to get this special treatment. He did present a bit of a cantankerous facade and he smoked like a chimney, but once past those traits, he was a great person to know and a real treasure. I can’t imagine how much knowledge went with him and hope his spirit and philosophy of reproduction parts continues."
petehoovie
Well-known member
whizzernick
Well-known member
I have been talking and buying from Roy for so long I must guess . 40 + years .. But I still do not know much about Roy. I would like to know more .. Very sad day
john stimac
Senior Member
I knew Roy well,He and his family are in our prayers.
I can't more than what's already been said about Roy. As others mentioned, he made you feel like you were the most important person when you talked to him. Freely shared his knowledge and was just a great, funny guy to talk to.
My condolences to his family. Rest in peace, Roy.
My condolences to his family. Rest in peace, Roy.
VeryTangled
Well-known member
I was a noob, in a hotel in Hiawassee Ga during a V-8 Meet.
It was probably the first day I ever saw Michael Driskell. And there lies another tale.
I dialed, and Roy he answered. Maybe he was happy to hear from someone in that town. I wanted a vacuum line from dizzy to manifold for my 36. Best conversation ever. And we won't even doubt the piece that came in the mail. In the years after I always nodded my head in the correct direction when in the vicinity, but didn't feel super-worthy to take him away from the long line of buddies waiting to get a word.
That black oxide coating (triple run) is heavenly and I love opening a bag his fasteners to put into my car(s)! Especially when chucking some crap that jackleg's have put on my car after their small brains decided to toss the original Ford fasteners and replace them with junk. We have the last word, Roy, you and I.
You can't really have a moment of silence on a message board... But this person was worthy of it.
Edit to add: I really dig libraries too! If I had access to BFRC on a daily basis... They would need to rotate the chairs in the reading room because I'd be wearing one chair out for being plopped in it for an hour or three every single day. MOST AMAZING LIBRARY EVER! And this is from a guy who has easy access to the United States Library Of Congress!
It was probably the first day I ever saw Michael Driskell. And there lies another tale.
I dialed, and Roy he answered. Maybe he was happy to hear from someone in that town. I wanted a vacuum line from dizzy to manifold for my 36. Best conversation ever. And we won't even doubt the piece that came in the mail. In the years after I always nodded my head in the correct direction when in the vicinity, but didn't feel super-worthy to take him away from the long line of buddies waiting to get a word.
That black oxide coating (triple run) is heavenly and I love opening a bag his fasteners to put into my car(s)! Especially when chucking some crap that jackleg's have put on my car after their small brains decided to toss the original Ford fasteners and replace them with junk. We have the last word, Roy, you and I.
You can't really have a moment of silence on a message board... But this person was worthy of it.
Edit to add: I really dig libraries too! If I had access to BFRC on a daily basis... They would need to rotate the chairs in the reading room because I'd be wearing one chair out for being plopped in it for an hour or three every single day. MOST AMAZING LIBRARY EVER! And this is from a guy who has easy access to the United States Library Of Congress!
Last edited:
petehoovie
Well-known member
Last edited:
35fordtn
Well-known member
Hi all, I made the flight up to Michigan today to attend Roy’s service. It was very nice with some very familiar Early Ford faces in attendance, including the Vice President, National Chief Judge, National Chief Judge Secretary of the National Club; not to mention many of Roys other Old car, racing, and family friends. Roy was indeed well respected no doubt.
To accompany the above photo of Roy taken last year, I thought I’d attach a photo of Roy next to his first 1937 he restored. I do not know the date of the photo as it was WAY before my time, but my guess would be 1968??.. That familiar smile of a much younger Roy says it all with no caption needed.
Sent from my iPhone using Tapatalk
To accompany the above photo of Roy taken last year, I thought I’d attach a photo of Roy next to his first 1937 he restored. I do not know the date of the photo as it was WAY before my time, but my guess would be 1968??.. That familiar smile of a much younger Roy says it all with no caption needed.
Sent from my iPhone using Tapatalk
Seth Swoboda
Well-known member
That guy in the middle is a beacon of hope to those of us in this hobby who want to restore and preserve early Fords. Support him and encourage him and you'll be rewarded.
nelsb01
Well-known member
The hall at the funeral home was full -- while I go back with my involvement with Roy well before 35tnford, it was none the less an unbelievable out pouring of love and affection from all in attendance. I personally saw many others who I would not have met if it was not for knowing Roy. Thanks Roy. You improved my life and enhanced my involvement in old Fords and the Early Ford V-8 Club. And not to mention the great job you did in mentoring your children, your step children and your grand children.
I wish you were still here to continue to guide us on our journey.
I wish you were still here to continue to guide us on our journey.