Rotisserie recommendations

rockfla

rockfla

Well-known member
Any of you have a rotisserie that you like or dislike, suggestions etc etc??


Thanks
Rockfla
 
I have a Whirly Jig brand rotisserie. Have had it for going on twenty years. Have used it in three restorations and two of those were heavy Lincoln Zephyrs. Well built product.
 

Attachments

  • IMG_1156.jpeg
    IMG_1156.jpeg
    68 KB · Views: 61
Last edited:
I second that on the Whirly Jig. A little costlier than some, but I've been well pleased with mine. I have had it since 2006.
 
Well - I used two engine stands. The rear of the frame I made a bar to go between the frame rails and bolted on the restating portion of the one engine stand. Then I put a 2x6 board from floor to ceiling, drilling a hole for the round end for the round bar that would go into the engine stand and put a bolt through the hole in it to keep it home. For the front, did the same thing but this time used the engine stand on that end, making @feet” for the engine stand to bring the frame up to a height that would clear the floor.

If you would like more info, send me a pm with your email address and I will send you pictures…
 
I purchased the Auto Twirler Pro years ago and it has been great. Very well built and it is Made in the USA. I think most others, if not all, are made overseas.
 
Thank you everyone for your input, I am only a "suggestion" source and not the purchaser BUT I will end up with it once my friends TR6 is finished SO....I will make the suggestions and let him buy what he likes!!!!
 
You must log in or register to reply here.
Back
Top