Restoring steering wheel from broken pieces.

[Model "A" Fords]

Can you post a before and after picture ?

I'll see what pictures I have to post.

The red steering wheel / filler from glass to asbestos fibers were used as well as others.

I wouldn't recommend grinding that old red bakelite without a mask.

Thanks' for pointing out the risks. I agree with the mask.

 

[Model "A" Fords]

Attached are a few pictures showing my second wheel in the early stages of die grinding. None show the completed grinding job so just imagine less resin and more steel frame. I will ask my car guy if he could send some pictures of my wheel in it's finished state

The one picture shows the SMC logo and would like to know the manufacturer. Supposedly a Canadian firm. Notice the crack on the right side. That crack was originally through the logo to the other side but I did a test repair as you can see. After the test I decided to remove all signs of cracks every where including under the logo, completely going over the wheel but unfortunately didn't take any more pictures.

 

[Model "A" Fords]

Finally photographs of the finished steering wheel.