Reintroducing my Model A
- Thread starter jboggess
- Start date
Not George
Senior Member
Looks great!
jboggess
Senior Member
Been awhile, but still here and still working on the 29 A, after 3 days of no luck of starting the car, I finally got it going, turned out that the AMP meter has to be wired as well. After that, it started right up. Here's a youtube link if anyone is interested in see it. Thanks.
https://www.youtube.com/watch?v=IRZCYFAncmQ&list=UUs0Kc0KBx0JBPWFV7Mkrz4w
https://www.youtube.com/watch?v=IRZCYFAncmQ&list=UUs0Kc0KBx0JBPWFV7Mkrz4w
Drive Shaft Dave
Well-known member
The part you show are called deck lid aligning wedges, two are used, they fit in the trunk lid rain gutter area, but I see you have a rumble lid configuration, that being the case there are two wedges used in theupper part of the rain gutter that are rectangular in shape held on by a flat head screw and nut. Vendors have them.Nice picture Fred! Sooo I have a question though, so I have these 2 half moon washers that im guessing keeps the rumble lid inline, Im just not sure where they go, some where on the bottom im guessing?
Brother Hesekiel
Senior Member
What paint color is that, exactly, and and in what direction did it go "wrong?"
FrankWest
Well-known member
If I remember correctly Henry Ford build his original Model T engine prototype on his kitchen table!
Last edited:
jboggess
Senior Member
It was suppose to be the standard 29 Thorne Brown which is a lot darker then this. But some how the paint shop ended up with this color. We decided we liked it better so we kept it.
grumpyoldsman
Senior Member
the half moon parts go at the bottom of the corners for a deck lid the ones for a rumble lid are square and go in the top corners . look in one of the parts books from snyders and you will see
Synchro909
Well-known member
Nice work and nice colour. Like they say, "Do it right, do it once"
That said, I would have repaired a car like this, not restored it and driven it with all of its patina.
We are envious of you guys because cars like this NEVER turn up here and I'd nearly trade my first born for one.
Don't let my daughter see this pleeeaaase!
That said, I would have repaired a car like this, not restored it and driven it with all of its patina.
We are envious of you guys because cars like this NEVER turn up here and I'd nearly trade my first born for one.
Don't let my daughter see this pleeeaaase!
BlueSunoco
Well-known member
Nice! Thanks for the updates keep them coming very interesting.
jboggess
Senior Member
Thanks for the comments guys. This car was not a barn find though, we bought this car from a guy who wills and deals with Model A Fords and all what he does is takes spare parts and just puts them together. He didn't even have the decency to take the birds nest out of the water pump before he put the engine together. Here are some pictures before he sold it to me and as you can see in the one picture of the snow covered A's in the back ground. Poor A's 
Attachments
jboggess
Senior Member
Still here and slowly but surely the A will get done, we went for our first ride a few months ago, runs wells and shifts very nice. Since we replaced all of the engine mounts and added the small front engine spring in front (didnt have one before) it takes off just smooth as smooth, no more chattering. 
.. The only thing is about after 10 minutes of each ride the car starts to boil, i read some where that it might be a bad head gasket? The engine only got a valve job and new water pump and that was it. Also we finally got the head lights for it rebuilt, dad didn't want the chrome ones so we got the old ones re-nickle and put back together. Heres some pictures.
.. The only thing is about after 10 minutes of each ride the car starts to boil, i read some where that it might be a bad head gasket? The engine only got a valve job and new water pump and that was it. Also we finally got the head lights for it rebuilt, dad didn't want the chrome ones so we got the old ones re-nickle and put back together. Heres some pictures.Attachments
Brentwood Bob
Well-known member
Eliminate a cracked block(water in the oil) when you pull the head.
The boiling sounds familiar.
Bob
The boiling sounds familiar.
Bob
jboggess
Senior Member
Finally got the lights to work the other day, pretty easy really just some finicking with wire ends thats all.
Got home the other night from work and found my dad joy riding in it late last night in the big parking lot next door. Those bulbs are supper bight for being on the 6 volt system! Just saying.
After all the issues that we have had with this car the last few years, from pulling the engine 3 times, body pans welded on worng, doors not closing due to bent hinges, the family has decided to call this car Rose, she looks pretty but she has thorns.
Got home the other night from work and found my dad joy riding in it late last night in the big parking lot next door. Those bulbs are supper bight for being on the 6 volt system! Just saying.
After all the issues that we have had with this car the last few years, from pulling the engine 3 times, body pans welded on worng, doors not closing due to bent hinges, the family has decided to call this car Rose, she looks pretty but she has thorns.
