Rear Bumper Bracket - Straight or Angled?

Russ

Russ

Member
The attached picture shows the rear bumper brackets on my '29 Briggs Fordor. As you can see, the left one goes straight out to the side while the right one is angled toward the rear. These are both the correct brackets, I think one is just a little bent. Which one is correct - straight or angled?
 

Attachments

  • IMG_9450.jpg
    IMG_9450.jpg
    56.7 KB · Views: 275
I agree. The right side one appears bent outward. You can tell from the space between the bumperette and fender on each side.
Rusty Nelson
 
Thanks guys. Straight out (left side) is correct and angled (right side) is incorrect. Now I know which one needs to be fixed.
 
I would check a car that is known to be correct . The distance of the bumper on the left seems to be to close to the fender . The distance should be equal on each side . I could not see from the photos enough to be sure . Norm
 
d.j. moordigian: Thanks for posting the FB link. Both brackets have a slight wave which I'm glad to learn came from the factory (I thought those came from tampering by previous owners).

After reading the linked post, I think I have taken a step backward. Marco Tahtaras states in the post that the brackets should not be in-line and should be swept back about 10° (110° bend), if I am reading his post correctly. This would look more like the one on the right (???).

I think everyone is working from their best information, but I still don't feel 100% confident that we know the correct answer. Does anyone have a nice unmolested Model A sedan that they can photograph (rear bumper brackets) to clarify?
 
Russ said:
d.j. moordigian: Thanks for posting the FB link. Both brackets have a slight wave which I'm glad to learn came from the factory (I thought those came from tampering by previous owners).

After reading the linked post, I think I have taken a step backward. Marco Tahtaras states in the post that the brackets should not be in-line and should be swept back about 10° (110° bend), if I am reading his post correctly. This would look more like the one on the right (???).

I think everyone is working from their best information, but I still don't feel 100% confident that we know the correct answer. Does anyone have a nice unmolested Model A sedan that they can photograph (rear bumper brackets) to clarify?
Click to expand...

I gave you INCORRECT information on which one was correct AND agree with Marco on
which one looks correct,..the right hand one,...so far, okay ! ?
 
For US cars the drivers side is the left side and passenger is the right side, the right side looks correct, the left side the bracket looks bent and the bumper bars don't look quite right.
 
Russ
I Hope that here is the answer that are you looking for
 

Attachments

  • bumper-1b.jpg
    bumper-1b.jpg
    39 KB · Views: 86
  • soporte paragolpe trasero.jpg
    soporte paragolpe trasero.jpg
    21.4 KB · Views: 58
Last edited:
Thanks again for the input everyone. After digesting the info and doing a little more research, I now agree that the brackets should be swept back about 10­° on each side. It would be useful to have this info in a future revision of the Model A judging standards.
 
Russ said:
Thanks again for the input everyone. After digesting the info and doing a little more research, I now agree that the brackets should be swept back about 10www.jalopyjournal.net° on each side. It would be useful to have this info in a future revision of the Model A judging standards.
Click to expand...

Good luck!...
There was a discussion about 2 months ago with 7 or 8 people in it, "off line".
There should / could be a small book-let that shows the "holes" for the different
body styles, stands and shapes in photos..

Dudley
 
And if you want to be more original, the first 4-5 inches of the chrome bumper (where the two bolts go thru that hold it on the brackets) was originally painted black.
 
You must log in or register to reply here.
Back
Top