rear brake lever on backing plate

[kwisor]

hello
i am putting on my rear brake arms on the roller track i took photos but not very good ones dose the flat side go towards the backing plate or dose the taper side?
thank you kevin

 

[Bob C]

Can you post a picture, I haven't got a clue what you are asking.
Can't think of an arm on the roller track.

 

[CWPASADENA]

Tapered side goes toward the backing plate. There is also supposed to be a "Dust Ring" between the lever and back plate. This is what the taper is for.

Chris W.

 

[kwisor]

thanks got it
kevin

 

[Bob C]

OK, so you were asking about the lever that goes on the camshaft.