Question about using 32-34 front axle in model A

1

12secvx

Member
My question is when a 32-34 front axle, 32 spindles, 32 perches, on a model A and keeping manual brakes. Which king pin set do you use when rebuilding with new bushings and bearings? A model A 28-31 set or model B 32-34 set? Thanks Ben
 
Here's a couple of pictures.

Bob
 

Attachments

  • DSC01459.jpg
    DSC01459.jpg
    64 KB · Views: 128
  • DCP_1127.jpg
    DCP_1127.jpg
    62.1 KB · Views: 101
Well I have 16" 35 wheels on it now and I think it needs to get out of the trees!
So I collected a couple of parts to help it get lower and still keep it OE ford parts kinds. I have a reversed eye T spring for the rear, 34 front axle and spindles=1.5" of drop, 32 perches, stock model a wishbone, flatted out A to 32 style front crossmember which should give me another 1" or so. And a reversed eye front main spring as well that I plan on adding or removing leaves to adjust it as needed.
 
Bob is correct, the model A pins, acctuators ect work on the 32 stubs. I think you can use 32 pins but then use all 32 stuff but you can't mix.Here is another picture,though I didn't use 32 perches..:)
 

Attachments

  • back on the road 003.jpg
    back on the road 003.jpg
    95.6 KB · Views: 77
Listen to what Bob C says. Using the 32 perch pins and A kingpins and acuators keeps the brake rods and everything in line. Since your going with 32 spindles I assume your using 32 brakes also, if not I suggest you do and a Flathead Ted kit.
 
Last edited:
You must log in or register to reply here.
Back
Top