Power steering on my 34

T

trevo

Senior Member
Finally after a winter tidy up new sump gasket engine mounts etc am re installing my Power Steering set up works great anybody wanting a few pics and explanation pm your email address and I will send them through obviously only of use to those with early cars I'd say cheers.
 
Hi scooder prefer not to sadly there are a few on the Barn who take delight in nit picking put downs which causes me to Post carefully quite often not at all, happy for genuine guys to PM me have photos shortly on the way to a couple of Barners.
5windowcoupe I have trialed the set up for over 12 months now and here we have pretty strict warrant of fitness vehicle examininations every 6 months. Apart from some professional machining require pretty straight forward utilising an MR2 electric pump and new mid 60s Mustang actuator and ram what a difference so light no extra holes are drilled anywhere.
Cheers.
 
Kahuna not sure that I know off hand but my 12v electrics handles it well no issues I positioned the pump tucked up behind the battery rubber mounted on a plate which perfectly matched original punched holes the wiring is heavy duty to handle the current I had a mate who is an Auto Sparky wire it for me can supply that info would need to talk to him photos on the way shortly cheers
 
Trevo, did you use one of those reaction type cylinder (cylinders, not ram,you know what they do) in the drag link,like an old vickers type used on bedfords.
Lawrie
 
Trevo,
Sounds like the bendix type power steering? Like the sort used from early 50's up Fords and corvettes, with the controll valve on the end of the drop arm to idler arm (center link) and the ram?
I'll pm you as I'm looking at doin this on my pickup.
Martin.
 
I think the electric PS is also very simple and inexpensive. However it requires the modification of the steering shaft. Not really sure it would fit under a 34 dash, have a friend with one under a 38 dash.
 
Lawrie everything is available over the counter brand new the ram or power Steering cylinder is mid 60s Mustang. We just returned from Melbourne the Motoclassica Concourse De Elegance was amazing also went to Duttons Garage and the Fox collection
 
Hope all those that pm me have the pics any further explanation email me happy to help those genuinely interested cheers
 
Some folks over on the HAMB might be interested in this too. Can you get on that forum as well, trevo?
 
Art Maurice PM me with your email address and I will send you photos which will give you an idea of the set up cheers
 
You must log in or register to reply here.
Back
Top