Power steering for 1951 Ford car

I put a new Borgeson Saginaw 525 steering box with a 25-1 ratio in my 36 pickup. No pulley, no belt, no hoses and no fluid. It steers effortlessly. The total cost was less than $600.
 
51shoeboxer said:
Thanks, I saw that. There is a 1953 FoMoCo power steering assembly - for parts only - on ebay now.
Click to expand...
Make sure all the pieces are there if you want to rebuild that unit. Some pieces are not available and you may look a long time to find them. Check into the mid 60's Ford power steering units as they may work on your car. As I recall they are very similar to the early units.
 
TJ said:
Make sure all the pieces are there if you want to rebuild that unit. Some pieces are not available and you may look a long time to find them. Check into the mid 60's Ford power steering units as they may work on your car. As I recall they are very similar to the early units.
Click to expand...

What you will need:
 

Attachments

  • s-l1600 -1.jpg
    s-l1600 -1.jpg
    38.2 KB · Views: 54
You must log in or register to reply here.
Back
Top