power house generator parts

John Duden

John Duden

Well-known member
Is there anybody that reproduces powere house gen parts? is ther anybody with the early 28 style 5 brush they are willing to sell as a parts gen? i bought one that somebody must have been on a car, and they must have tried to work on it but broke the plastic brush holder and could not find it so they sold it to me for $40.
need some parts, know of anybody that reproduces them?
John
 
I wish someone would repro the brush holders, both the 3 brush and the 5 brush, but none have been made for quite a few years.

I have repaired broken ones by using JB weld.
 
John. I have a dozen or so here, what do you need . freight could be expensive but you can,t find there pos i can help. Derek from a snowy cold NZ.
 
Tom Wesenberg said:
I wish someone would repro the brush holders, both the 3 brush and the 5 brush, but none have been made for quite a few years.

I have repaired broken ones by using JB weld.
Click to expand...

Tom

Do you have a voltage regulator for a power house generator? How hard is the installation? A friend has a five brush.

Thanks
 
quickchange said:
John. I have a dozen or so here, what do you need . freight could be expensive but you can,t find there pos i can help. Derek from a snowy cold NZ.
Click to expand...

i need the 3 & 5 brush brush plastic holder, it is the plasstic circle held on be 3 arms holding the brushes, and a good cover,
also looking for the earlyest style with the support mount.
John
 
It is Bakelite, which breaks easy. I have thought about trying to make some of the rings, but reproducing the actual holders and attaching them without the rings busting still looms large in my mind. Maybe I will start trying to make the molds and a trial at a couple of different plastics this winter. One thing about this hobbie is it is participant driven and many have stepped to the plate to fill a nitch. Rod
 
I have a 3 brush holder that is NOS, I was hoping Tom would send me a broken
5 brush for dimensions.....the shop next door and myself, can make them.
 
When I get back home I may have a broken 5 brush ring I can send to you. I saved it for the brush holders so I did not have to ruin a good one to get dimensions for the holders. Will see if I can locate it. Rod
 
I sure am glad to see this thread! The first thing I check for when I get the latest catalog is the "New Items" hoping someone has started to reproduce both 3 & 5 brush holders and offer a rewound armature with a new commutator. I like the 5 brush but I have a few of both kinds of Power houses that I would like to see if I could get working again. John
 
You must log in or register to reply here.
Back
Top