Powder coating wheels

[bdotson]

What is a fair price for powder coating a wheels? Any one know of a place in the east texas area that does it at a reasonable price? thanks Buddy

 

[Bill W]

Don't know anout the Texas area but I had mine done at Gerard Tire in Charlotte, NC for $ 20.00 per wheal. I furnished the pant as they did not have the color that I needed but if you choose a color in stock by them it is still $20.00 per wheel.

Bill

 

[Mitch//pa]

i believe i paid about 70.00 a wheel that included everything, sandblasting, and materials.

 

[Bruce]

Our favorite powder coater charges $45/wheel for blast, undercoat, top coat, and bake using their powder. Stock colors are PD close -- easily within range of tones that your Model A friends would accept as bonafide and true-to-Henry. A bare frame with running board brackets runs $225 for blast and coating.

 

[ford31]

mine about a month ago(5 wheels) 280 for sand blasting and powder coated red,sand blasting is by the hour sunrisebeach,mo

 

[V4F]

out here in n.ca. they charge $25/each . all included ......... steve

 

[Bill Cal.]

Steve,
Could you please tell me where you had your wheels done? Thanks, Bill

 

[Brentwood Bob]

Steve, would also be interested in powder coater. I was quoted from Les schwab at $268. for 4. demount, powder coat,remount, and balance-out the door. Bob

 

[Pacersw]

Sounds like some real good deals......Coker Tire is charging me $55.00 per wheel to powder-coat their new 19 inch wheels.

 

[denis4x4]

$50 a wheel to blast and powder coat here in Durango

 

[Mitch//pa]

I guess I over paid a little but they sure look and hold up great.

 

[bdotson]

I guess I over paid a little but they sure look and hold up great.

I got a quote here for 100 each you bring the wheels in with the tires off. I think I can beat that even with the shipping

 

[Model A Man]

I got a quote here in california at a car show that had a vendor setup and I was quoted $125.00 per wheel.

 

[Mike V. Florida]

I got a quote here for 100 each you bring the wheels in with the tires off. I think I can beat that even with the shipping

About the same here in Florida

 

[Cape Codder]

What product can be used to fill spokes for smoothness prior to Powder Coating. I have always thought JB Weld could be used but don't know if it could hold up to the heat.

Thanks for your time.
Joe Grobleski
Cape Cod

 

[wrndln]

I used J-B Weld to fill some curb nicks and dings before powdercoating. It work fine.

 

[kenparker]

D-K Powder Coating in marshall, Texas does a beautiful job. That have done 10 wheels for me and at least 20 for friends of mine here in East Texas. Cost $40 or $45 per wheel if i 'member correctly. Ken

 

[kenparker]

Call D-K Powder Coating in Marshall, Texas. They do a beautiful job. They have done several sets of wheels for me and friends in the area. Ken

 

[rogeroadster]

What product can be used to fill spokes for smoothness prior to Powder Coating. I have always thought JB Weld could be used but don't know if it could hold up to the heat.

Thanks for your time.
Joe Grobleski
Cape Cod

I used J-B Weld to fill some curb nicks and dings before powdercoating. It work fine.

I've heard about JB Weld and also Eastwood recommends a product called Lab-Metal. Has anyone had any luck with it?

 

[bdotson]

Call D-K Powder Coating in Marshall, Texas. They do a beautiful job. They have done several sets of wheels for me and friends in the area. Ken

Thanks will do