Post distributor/59ab heads

I have done several and to hold the distributor I drill and tap a hole on each side of the neck a toward the top and tap them for 1/4 inch ss socket head set screws. Has worked for me. I have done it with both the cast cover and later aluminum one.
 
Krylon32 said:
I have done several and to hold the distributor I drill and tap a hole on each side of the neck a toward the top and tap them for 1/4 inch ss socket head set screws. Has worked for me. I have done it with both the cast cover and later aluminum one.
Click to expand...


DITTO

put rag in cover and drill for a 8/32 allen screw . doesnt take much to hold the dist as it doesnt really drive any loads etc....
 
Krylon32 said:
I have done several and to hold the distributor I drill and tap a hole on each side of the neck a toward the top and tap them for 1/4 inch ss socket head set screws. Has worked for me. I have done it with both the cast cover and later aluminum one.
Click to expand...

I'm trying to picture this in my head. A picture would be great if anyone has one. Sure would appreciate it.
 
You must log in or register to reply here.
Back
Top