Piston ring source.

[Brian SATX]

Any one have a good source for rings that are.07 over. I looked at the uuual vendors, they do not sell .07 over rings. A friend is refreshing an engine that has .07 over psitons and he wants somenew rings. Any ideas on a source?

 

[Dodge]

Just use .080 and use a ring filing tool. They will work just fine.

 

[CWPASADENA]

Buy .080 O.S. rings and adjust the gap accordingly. .070 is so close to .080 O.S. you will not have a problem. I would strongly suggest cast iron rings and not chrome faced rings. These old blocks are hard and sometimes chrome rings will not seat in.

This is just my opinion.

Chris W.

 

[CWPASADENA]

Just use .080 and use a ring filing tool. They will work just fine.

Dodge,

I did not mean to step on your post. I type a lot slower than you do.

C.W.

 

[BILL WILLIAMSON]

Dodge,

I did not mean to step on your post. I type a lot slower than you do.
CW,
Count your BLESSINGS, if I could tipe FAST, I'd write BOOKS & BOOKS & BOOKS & BOOKS------------------! ! ! !
Bill W.

 

[Synchro909]

Dodge,

I did not mean to step on your post. I type a lot slower than you do.
CW,
Count your BLESSINGS, if I could tipe FAST, I'd write BOOKS & BOOKS & BOOKS & BOOKS------------------! ! ! !
Bill W.

Bill, These computerators are getting smarter by the day. There are programs about that convert a spoken message to text so you only have to talk to the computer and it does the typing. I'm sure you have plenty of very interesting books in you. Just keep the dog quiet while you talk!

 

[BILL WILLIAMSON]

Bill, These computerators are getting smarter by the day. There are programs about that convert a spoken message to text so you only have to talk to the computer and it does the typing. I'm sure you have plenty of very interesting books in you. Just keep the dog quiet while you talk!

I have a new VOICE EXPRESS set up, still in the box The Dog convinced me that it WOULDN'T understand my "back woods" LINGO
bILL w.