Pines Winterfront 1936 Ford

[3ARDUN2]

Looking for an image or photocopy of the installation information for the shutter style Pines Winterfront that mounts behind the grill but in front of the radiator on 1936 Ford Passenger Car. Also looking to correspond with anyone having an original handle for the control cable assembly. Thanks in advance, John.

 

[KiWinUS]

I have an original NOS in box. I will take it out this weekend & see if it ha instructions @ pull knob.

 

[mercman from oz]

1936 Ford Deluxe Three Window Coupe with teh Pines Winterfront Trim.

 

[KiWinUS]

Great looking car Mercman. It has the Pines Trim. This is the box for the Pines Winterfront behind grille
https://www.jalopyjournal.com/forum/attachments/36winterfront-2-jpg.3386063/
And this is the Pines Winterfront in front of grille
https://www.fordbarn.com/attachments/286642/

 

[3ARDUN2]

Thanks so much for replying so quickly KIWIinUS. Looking forward to seeing the instructions. I’m missing the handle and would like to have a duplicate made. Thanks again, John. (I’m in Windsor Ontario just across the river from Detroit and Roush’s corporate offices.)

 

[mercman from oz]

Photo of original carton for the 1936 Ford Winterfront Accessory.

 

[cajunfirehawk]

I assume yall know there are at least 2 pines grill covers on ebay and have been there for several weeks.

 

[KiWinUS]

Here’s all the pieces I have. There may be a few nuts & screws missing as packet was deteriorated bad. I have instructions & template for dash & will add later when I have them flattened.

 

[KiWinUS]

Instructions

 

[3ARDUN2]

These photos are wonderful. Thanks so much, KIWIinUS. I don’t have either the knob or the faceplate that goes under the knob. While I think I can duplicate the faceplate from the photo, do know anyone that could duplicate your knob in epoxy resin. A lot of crafters are doing wonders with epoxy resins. Naturally I would cover all expenses incurred as well as your time. Many thanks, many thanks, John.

 

[mercman from oz]

1936 Ford V8 with Pines Trim

 

[mercman from oz]

Part of the 1936 Ford Pines Winter Front Kit that fits behind the Grille.
Thanks for sharing these incredible photos from this Kit.

 

[Model51]

Try contacting Keith Lee of Knob Soup. He specializes in making reproduction knobs and his work is flawless. His email is knobsoup@gmail.com
He will need to have the original knob from which to make a master mold.

 

[rockfla]

Try contacting Keith Lee of Knob Soup. He specializes in making reproduction knobs and his work is flawless. His email is knobsoup@gmail.com
He will need to have the original knob from which to make a master mold.

Or David Morton at UnObtanium Products (864) 979-1844 karmodeler2@aol.com

 

[rockfla]

Some of David's work


1. 46 Cadillac Horn button.....Hens teeth in NOS form (or aftermarket for that matter)


2. 32 German Choke knob.....Hens teeth


3. 32 German Door Handle knob


4. 32 German Window Winder Knob and machined brass hardware.

 

[cajunfirehawk]

1936 Ford V8 with Pines Trim

Actually one of these on ebay too, $2500, not mine just suprised you can find these...