photo1-1-window
- Thread starter RB
- Start date
V8COOPMAN
Well-known member
V8COOPMAN
Well-known member
.
Posting ENLARGED Pictures
Choose ANY or ALL pictures. Put your cursor over the thumbnail picture and LEFT click. The picture becomes larger and is sized to post.
You should also realize that the picture is now posted on the internet (the small thumbnail pictures which you already posted).
When the pictures were initially posted SOMEWHERE on the internet (on Ford Barn), EACH picture automatically became identifiable as an individual "URL". A URL is that "https://www.*********" identifier found on the upper left hand of your video screen.
To post the picture in an enlarged state, we already enlarged it by clicking on the thumbnail to enlarge to postable size.
Now place your cursor on the ENLARGED photo. RIGHT CLICK and a window pops down. LEFT CLICK on "Copy image link". Now, I like to think of the picture as being stored "IN THE MOUSE", temporarily.
Now, there are only about three instances in which you might want to post a picture like we're talking about. You can post in a thread which you started, or in a "QUOTE" which is available after every post, or a "POST REPLY" available at bottom left of every page of every thread. Clicking any of these three buttons will open an answer format which includes the little YELLOW SQUARE
(
)
with mountains in the upper band.
Once you have chosen the reply window, you will see the YELLOW SQUARE up top. Use your mouse to place the flashing cursor where you want the enlarged photo to appear.
LEFT CLICK on the YELLOW SQUARE. A small window will open downward with a slot to add the "https://....." URL. Using your mouse, move your cursor into that long slot. With the cursor in that slot, RIGHT CLICK and another window will drop down. LEFT CLICK on "Paste". LEFT CLICK on "OK". Your enlarged photo will now be posted.
This sounds busy or complicated, but it's not. Once you go through a few of these pic posting scenarios, it just about becomes automatic. Hope this helps you.
Dick Davidson/The Coopman
Posting ENLARGED Pictures
Choose ANY or ALL pictures. Put your cursor over the thumbnail picture and LEFT click. The picture becomes larger and is sized to post.
You should also realize that the picture is now posted on the internet (the small thumbnail pictures which you already posted).
When the pictures were initially posted SOMEWHERE on the internet (on Ford Barn), EACH picture automatically became identifiable as an individual "URL". A URL is that "https://www.*********" identifier found on the upper left hand of your video screen.
To post the picture in an enlarged state, we already enlarged it by clicking on the thumbnail to enlarge to postable size.
Now place your cursor on the ENLARGED photo. RIGHT CLICK and a window pops down. LEFT CLICK on "Copy image link". Now, I like to think of the picture as being stored "IN THE MOUSE", temporarily.
Now, there are only about three instances in which you might want to post a picture like we're talking about. You can post in a thread which you started, or in a "QUOTE" which is available after every post, or a "POST REPLY" available at bottom left of every page of every thread. Clicking any of these three buttons will open an answer format which includes the little YELLOW SQUARE
(
with mountains in the upper band.
Once you have chosen the reply window, you will see the YELLOW SQUARE up top. Use your mouse to place the flashing cursor where you want the enlarged photo to appear.
LEFT CLICK on the YELLOW SQUARE. A small window will open downward with a slot to add the "https://....." URL. Using your mouse, move your cursor into that long slot. With the cursor in that slot, RIGHT CLICK and another window will drop down. LEFT CLICK on "Paste". LEFT CLICK on "OK". Your enlarged photo will now be posted.
This sounds busy or complicated, but it's not. Once you go through a few of these pic posting scenarios, it just about becomes automatic. Hope this helps you.
Dick Davidson/The Coopman
