part identification

[townsedan29]

Hi working on assembling a feb 1930 murray town sedan for a friend. Can anyone tell me where these metal strips belong. they are 15 1/2 inches long with a 90 degree bend and cutouts to go around a nut or bolt and were in with parts for the doors. they are not the the retainer for the window seals murrays are different then briggs Thanks any help appreciated

 

[29spcoupe]

Upper door seal. Goes under the garnish molding to seal out rain.

 

[townsedan29]

Thanks but the upper glass seal is arched and the lower glass to door seal is part of the door glass mounting channel. these look like there a reinforcement I dont believe they will show when assembled

 

[Dave in MN]

Brad,
Is it possible they were from a different car. The owner (Vince) has made lots of purchases during the lengthy restoration....
They might have been included with a purchase of another item.
Good Day!

 

[Y-Blockhead]

Those are upper door seals, maybe for a Tudor? https://www.snydersantiqueauto.com/product.htm?pid=984382&cat=41673

 

[townsedan29]

possible I will have to see if he knows, the only thing is they are sprayed with epoxy just like his original window channels that I did back in the day. as far as window seal that could be but no T slot unless originals were different then what snyders shows and these are only 15-1/2 inches long