panhard bushings

T

Topher5150

Senior Member
I bought the panhard bushings for my 47 coupe from macs (part number 64-15742) they are a bit wider than the bracket. Is this a part that gets smooshed into place I tried a few different ways but it seems to come out the same. Also what size bolt holds the bar to the bracket
 
I also bought those bushings from mac's and I had to cut them down to be able to fit them. I am thinking of making my own (casting urethane in a plaster mold. Also the bushings from mac's are to soft!
 
Blix said:
I also bought those bushings from mac's and I had to cut them down to be able to fit them. I am thinking of making my own (casting urethane in a plaster mold. Also the bushings from mac's are to soft!
Click to expand...

Check with energy suspension. They have all sorts of urethane bushings and you may find some that will fit. I recall that years ago I used some urethane bushings from a rod shop that fit a four bar front end that worked on the 42-48 sway bar.
 
TJ said:
Check with energy suspension. They have all sorts of urethane bushings and you may find some that will fit. I recall that years ago I used some urethane bushings from a rod shop that fit a four bar front end that worked on the 42-48 sway bar.
Click to expand...

Thanks, i looked at my 34 for roadster project with four bar front suspension and you are right those bushings seems to fit on the panhard rod on my 46!
 
You must log in or register to reply here.
Back
Top