Orignial 1934 mesurment needed

FlatheadTed

FlatheadTed

Well-known member
looking for the measurement from the axle or the cross member to the centre fender joiner ,I get 14" but suspect it should be 14,1/2 or 15"Thanks any one ,Ted
 

Attachments

  • IMG_20171006_122352_5281.jpg
    IMG_20171006_122352_5281.jpg
    53.8 KB · Views: 59
Given the way you're measuring in the picture you posted, I measured 14 1/4 inches from cross member to joiner.
13 1/2 inches from axle to joiner....
 
Last edited:
My 34 Fordor measures 13-1/2" from the web of the axle to the front of the joiner--

In haste, I had written crossmember instead of axle the first time--Sorry
Old age setting in--------
 
Last edited:
I measured mine the way shown in the photo. I guess it depends on where the tape hits the cross member and how much bend you have in the tape.
 
Web of axle to front of joiner on a 33 - 13 15/16 " .

Web of axle to front of joiner on a 34 - 14 1/16" .

Much straighter line than crossmember to joiner .

Plenty areas for this dimension to wander !!!!!!
 
OK thanks ,The grills often don't fit that well and I think its because of a bend about were the horn mounts ,14-1/2 is about were I thought it should be ,Ted
 
You must log in or register to reply here.
Back
Top