Orignal horn

firechief5215

Senior Member
I posted earlier about my early 28 (LATE FEBURARY} ford horn, I'm pretty sure the horn is shorted out because it is causing the negative connector to also become hot , Is there someone that sells the original horns or if not the best supplier of a new one. Rather have a original though. I know this one is a reproduction Thanks Billy
 
I'd bet you don't need a horn. As I said earlier BOTH connectors will show 6 volts until you push the horn button and complete the ground circuit for the horn motor.

Unplug both wires, then take the wire with voltage and plug it to either terminal. Now take a piece of wire and touch the other terminal to ground. If the horn blows, then it's working fine.
 
send it to Jim Diehl in cadillac Michigan and he will re-wind your horn.
2534 Duffy Dr., Cadillac, Mi 49610

231-577-1375
 
Back
Top