Original door handle need key

Flathead

Flathead

Well-known member
Is there a good place to send an original (1930 Tudor) door handle to have a key made? I don't see any numbers on the shaft. Thanks for any leads:)
 
I have used Bulger safe and Lock here in Seattle on my pickup and many other vehicles. I highly recommend them.

Address: 11502 Lake City Way NE, Seattle, WA 98125
Phone: (206) 363-8797
 
Try A & L. Their contact is on a sticky above. Usually you don't need to send the handle. Their work is the finest.
Wayne
 
May I hitch a ride on this thread? I have the same problem on my car, a 'May '28 Tudor. I am assuming that the handle is original. I have looked at the blanks on the Model A suppliers' websites and they say their blanks are for "late '28" and newer cars. I also noticed that some of the blanks shown are opposite to each other. At about $14 they are not inexpensive enough to buy one of each and try them. Any ideas?
Thanks.

P.s. the photo somehow was sent upsidedown.
 

Attachments

  • door handle.jpg
    door handle.jpg
    51.1 KB · Views: 54
Last edited:
" I have looked at the blanks on the Model A suppliers' websites and they say their blanks are for "late '28" and newer cars."



Keys until March 1928 had a FORD script none thereafter.

They only sell original looking keys used after March 1928

If you have the Judging Standards check area 6-4

..
 
ModAfan your handle looks to be an original with the non removable cylinder . your key number should be on the shaft.
 
Call John Holland 330-483-3896 in Ohio. Your tumbler looks like it uses a Crown key. He has those blanks.
 
I have used this man several times. He is listed on the MAFCA WEB site. Excellent work.
Sorry I do not have his phone number. Perhaps another 'Barner will have it.

Cal Allan 392 E. Campbell
Chandler AZ 85225
Pop out Switches, keys and locks.
 
Heard Cal has retired.
Bob

Bob, he restored a pop-out for one of our club members about 6 weeks ago.
 
I have used Dick Crabtree, (605) 487-7229 or (281) 615-2261 mbcrabtree@aol.com

Dick has done my Model A and Early V-8 lock work for years. He is very knowledgeable and his work is outstanding. Very fast turn-around time and reasonably priced. He also does a great job on Pop-Out Ignition Switches. He will key the door lock to fit the ignition as it should be.

This is my opinion and experience.

Chris W.
 
You must log in or register to reply here.
Back
Top