Can someone please get me the part number for the oil galley plug with the star pattern holes in it that oils the distributor gear. I can't find it in the manual. The one that was in my engine when I got it rebuilt is sticking out too far and preventing me from installing the distributor. I tried grinding the back of it so it would give me more room but it is going in just about two turns, still hitting the gear. I don't know if it's the correct part or not. It's 1/2" with size 20 threads. It is currently 1/4" long and I believe needs to be flush with the block. I'm really confused and aggravated. I think it may need to be tapered in the rear so it can go in further.
Oil galley, distributor gear oiler
- Thread starter B-ster
- Start date
dmsfrr
Well-known member
Fyi, the 'Ford' version of a Y-block doesn't have a plug there.
photo 1
Looking down thru the opening in the block for the distributor housing & shaft.
photo 2
The machined ledge the driven distributor shaft gear spins on, and the area behind it,
looking down from the center rear of the lifter valley.
photo 1
Looking down thru the opening in the block for the distributor housing & shaft.
photo 2
The machined ledge the driven distributor shaft gear spins on, and the area behind it,
looking down from the center rear of the lifter valley.
Attachments
Last edited:
KULTULZ
Well-known member
SOURCE - https://www.fordbarn.com/forum/newreply.php?do=newreply&p=2218565
I think he is beyond this mystery. I can't figure it out.