Odd pipe in oil gallery, any ideas please?

Charlville

Charlville

Senior Member
Just pulled the tappet cover off to fit an oil filter kit and where the pipe is to be located for the oil filter feed a pipe has already been fitted and is pointed down into the timing cover. Now maybe it had an oil filter kit fitted previously or there were oiling issues? Either way I want to remove the pipe to fit the pipe for the oil filter kit. But now worried that I may cause an issue by doing so. Car has a Simmons Power Head not sure if this makes any difference?

Thoughts welcome please ;)
 

Attachments

  • IMG_0249.jpg
    IMG_0249.jpg
    64.4 KB · Views: 262
  • IMG_0250.jpg
    IMG_0250.jpg
    76.8 KB · Views: 240
The only thing I can think of is to channel more oil flung off the timing wheel to the main bearing feeds . .I hope it is well secured so it doesnt get eaten by the timing wheel ,I would remove it as IMHO the benefit would be minimal .

John in dreary cool wet where is Mr Sunshine Suffolk County England.
 
Think when you drop the pan you will find the pipe goes to the mains as a homemade pressure to the mains--- look in the valve chamber to see if the oil feed pipes are blocked off
 
Hi All

Thanks for the all the inputs.

Removed the offending pipe and fitted the oil filter kit, all seems well (so far:))
 
Mr. Flood,

Can you display a couple of pics of your Simmons Power Head.:cool:
I've got one that I'm hoping to put on a car in the near future, I hope.;)

Bob-A:D
 
You must log in or register to reply here.
Back
Top