FrankWest Well-known member Jul 13, 2024 #1 1933 model b replaced coil and condenser When starter is activated car ammeter jiggles, but have no spark at plugs I am getting so old and confused, need help
1933 model b replaced coil and condenser When starter is activated car ammeter jiggles, but have no spark at plugs I am getting so old and confused, need help
deuce lover Well-known member Jul 13, 2024 #2 Do you have current to the coil? When you touch the red and black multimeter wires to each other ,do you get a reading? If so then to the each terminal of the coil ,does it register?
Do you have current to the coil? When you touch the red and black multimeter wires to each other ,do you get a reading? If so then to the each terminal of the coil ,does it register?
TerryOH Well-known member Jul 13, 2024 #3 Have you cleaned the distributor points and checked point gap? Is the battery ground path good?
FrankWest Well-known member Jul 13, 2024 #4 Is there a special trick in getting the rotor off to check the points? I thought the rotor will just pull off?
Is there a special trick in getting the rotor off to check the points? I thought the rotor will just pull off?
A bones Well-known member Jul 13, 2024 #5 They can be stuck, keep coaxing. Careful of your hand when it does let loose. Try a light tap tap tap while trying to raise it.
They can be stuck, keep coaxing. Careful of your hand when it does let loose. Try a light tap tap tap while trying to raise it.