New Member

Z

ZACSDADDY

Junior Member
Hello to All.......just joined the Barn, have surfed it through getting my 30 Coupe on the road last year. I now have a 30 Victoria and have more questions than answers! Thank you in advance for any assistance.
Don
-Are 30/31 Vics the same? 30s not slanted.........
-Are they all Murray bodies? Mine has a Murray body tag.....
-Are they also called slant windows when referenced, or is that a certain 31 sedan model reference?
-I have a body only, both doors with cowl. Roof panels and wood are about completely gone; are these parts Vic only?
-There is no subrail/subframe to speak of.....
-Is there a good source for new parts, Ebay STINKS!
- I need glass, garnishes, interchange info, etc.
Basically, I need to know what I have to properly ask for the parts I need.
heeeeeeeeeeeeelp
 

Attachments

  • 30 Vicky 007.jpg
    30 Vicky 007.jpg
    73.2 KB · Views: 68
Last edited:
Don,
Welcome to the Model A world. A few answers to your questions;
-Are 30/31 Vics the same? Yes, both 30/31's are slant windshield, there were changes to some items from late '30 to '31.
-Are they all Murray bodies? Mine has a Murray body tag. Yes, Murray made the bodies. There have been no documented bodies produced by Briggs found as yet.
-Are they also called slant windows when referenced, or is that a certain 31 sedan model reference? They are simply referred to as a Victoria, they were the first with a slanted windshield.
-I have a body only, both doors with cowl. Roof panels and wood are about completely gone; are these parts Vic only? Yes, alas
-There is no subrail/subframe to speak of. It is wood in a Victoria.
-Is there a good source for new parts, Ebay STINKS! Generally, some new Victoria specific parts are available...wood, garnish moldings, door sills & glass.
- I need glass, garnishes, interchange info, etc. Check into the Victoria Association for more info: www.VictoriaAssociation.com
Vern
 
Congrats on the Vickie. We love ours. I have seen some Vickie parts here on the swap net. Hang in there and enjoy the build.
 
Thank you for the info Vern, and Phil. If ANYONE has Vickie parts for grabs please contact me. I have no floor to speak of, no wood solid enough to make a toothpick from; those are my starting points, but any parts would be great!
 
ZACSDADDY said:
Thank you for the info Vern, and Phil. If ANYONE has Vickie parts for grabs please contact me. I have no floor to speak of, no wood solid enough to make a toothpick from; those are my starting points, but any parts would be great!
Click to expand...

My son has a Steel back and yours is a leather back. The wood kit he got turned out to be for a leather back. Luckily there are only a few pieces that are different so give me a little time to get the pieces together, rear window frame, belt rail, and another piece or two.

Mike
 
Welcome to the hobby! There are several places to get new parts. Snyder's Brattons, Mikes, Berts to name a few. But there are many smaller places and you might have one close to you. It is always good to make contact with a local chapter and ask them about picking things up. There is a special interest group in the Model A Ford Club of America regarding the Victoria body style. It is a good place to seek answers to specific Victoria questions.
 
Wow, what a treat to log on and see folks responding! Thank you all for the greetings and for those helping locate parts = extra THANKS!
My first agenda is to "square" the body back up; need to find a floor and top to line this ole girl back up.
For those with parts, please keep me in mind; list your parts and price either here or PM. I will get back to you. Have a great day!!!!
 
ZACSDADDY said:
Wow, what a treat to log on and see folks responding! Thank you all for the greetings and for those helping locate parts = extra THANKS!
My first agenda is to "square" the body back up; need to find a floor and top to line this ole girl back up.
For those with parts, please keep me in mind; list your parts and price either here or PM. I will get back to you. Have a great day!!!!
Click to expand...

You will be rewarded many times over by getting the information from the Victoria Assoc before you start work on the car.
 
"STARTED" some work on the Vicky tonight. Wanted to see how bad the header area was. Surprisingly, it was not too bad. Had to hack a few bolts out of the way, rusted solid hardware and soft wood is never a good combo! HARBOR FREIGHT SAWS-ALL!!!!
 

Attachments

  • 30 Vicky 012.jpg
    30 Vicky 012.jpg
    60.6 KB · Views: 67
  • IMG_1308.jpg
    IMG_1308.jpg
    69.1 KB · Views: 47
  • IMG_1322.jpg
    IMG_1322.jpg
    74.9 KB · Views: 45
Zacsdaddy, love all the extra holes in the firewall! There were 37 in my Vic cowl, including a 2" diameter one for the heater.
What is the body number on the tag by the fuel shutoff?
And by the way, the exterior visor is not original to a Victoria.
 
Last edited:
Vern said:
Zacsdaddy, love all the extra holes in the firewall! There were 37 in my Vic cowl, including a 2" diameter one for the heater.
What is the body number on the tag by the fuel shutoff?
And by the way, the exterior visor is not original to a Victoria.
Click to expand...


PM SENT:cool:
 
Was this a right hand drive? The first picture in #15 looks like the notch for the steering is on the right side, though I can't see the bottom too well. Which side of the gas tank has the steering suport?
 
Tom Wesenberg said:
Was this a right hand drive? The first picture in #15 looks like the notch for the steering is on the right side, though I can't see the bottom too well. Which side of the gas tank has the steering suport?
Click to expand...
Tom, you are correct, the opening for the steering is on the right. You can see the left boss has not been cut out.
 
You must log in or register to reply here.
Back
Top