New head options

What head questions would you like to see on the market?

  • Would you prefer/buy iron

    Votes: 103 71.5%

  • Would you prefer/buy alum head

    Votes: 15 10.4%

  • Would you prefer/buy both;

    Votes: 24 16.7%

  • What combustion chamber shape would you buy crowfoot style chamber

    Votes: 24 16.7%

  • What combustion chamber shape would you buy Heart style chamber;

    Votes: 22 15.3%

  • Combustion chamber shape would give the best results.

    Votes: 65 45.1%

  • What range of compression ratio would you buy, 5:1,

    Votes: 18 12.5%

  • What range of compression ratio would you buy,6:1

    Votes: 78 54.2%

  • What range of compression ratio would you buy, 7:1

    Votes: 39 27.1%

  • What range of compression ratio would you buy, 8:1

    Votes: 17 11.8%

  • What range of compression ratio would you buy, 9:1

    Votes: 8 5.6%

  • What range of compression ratio would you buy, higher than 9:1

    Votes: 2 1.4%

  • Would you prefer/buy stock appearing head

    Votes: 91 63.2%

  • Would you prefer/buy finned head

    Votes: 35 24.3%

  • A water pump mounting

    Votes: 124 86.1%

  • B water pump mounting

    Votes: 16 11.1%
  • Total voters
    144
  • Poll closed .
bart78 said:
From the looks of it. People were talking about Winfield heads. I think its great seeing if people would be interested. I would even post this over on the HAMB. Tons of guys into bangers over there. I started this weekend taking down a motor. That I will be hopping up.
Click to expand...

I'm going to edit the original post (you can't edit the actual poll) and make it clear it is about the winfield head and post the link over on HAMB in the technical section.

Again i'm sorry for the confusion.
 
Last edited:
I based my answers on the Winfield head it seemed fairly obvious but I guess there could
have been some confusion.
 
Depsite any confusion, and potential uselessness of the poll, I am still going to proceed, but with the realization that the poll might not reflect purely Winfield style results. I still think it worth finishing up so it will be available to make heads at any time. I will start cutting the combustion chamber part of the pattern and probably have it finished before the weekend. That will allow me to mold both halves and test fit the core. I'm going to put the block ahead of the new head, though. I would really like to have a casting of the block for Hershey. I'm too busy to get either a block or a head machined by then, well, maybe not a head, but I won't have time to machine a block.

Tod
 
You must log in or register to reply here.
Back
Top