Needing some pictures

M

mrfirebird73

Member
I am in need of some pictures of how the package tray and front seat wood are mounted in an early 30 Cabriolet 68B. Car has a fixed front seat too. I know the package tray is attached to the body in the back but how is it attached to the body in the front? :confused:
 
check the picture I posted for you back in June about this same thing.
If that is not clear enough then let me know and I might be able to clarify.
 
Ray in La Mesa with the genius again. He remembers where to find all this stuff already out there on the internet!

I think he's talking about this link. http://www.modelahouse.com

TONS of pictures here. (350 pics of just one 68B)

Also go to the Picture Gallery.
 
Last edited:
Use http://www.modelahouse.com not http://www.cabriolet.modelahouse.com. Here are some pictures that will help you, there are others on the web site. As you can see there is a piece of wood that fits under the front lip of the package tray. There is a hole in each end of the wood. One of the bolts that holds on the wooden back belt is long enough to reach down to the piece of wood under the package tray. There is a wooden spacer between the end of the piece of wood and the lip on the top of the body panel. Notice that there are two slots in the piece of wood under the package tray. These slots are for the two tabs on the back of the back seat cushion.

Bob



med.P0002338.jpg

30body091.jpg
 
Now that we have that figured out, now I am am curious about how the door goes back together. I was not there when it was disassembled. I know how the latch and regulator go but was wondering about the glass channel at the front of the door.
 
You must log in or register to reply here.
Back
Top