Need to know Brake rod return spring bracket location?

DeBordEngineMan

DeBordEngineMan

Senior Member
I am installing a new brake system on my 29 Tudor Sedan and the rear brake rod return spring brackets are there and mounting is no problem the front is another story the brackets on the frame are missing and I do not know were they go on the frame. I have a general location of were they go because of the "dog knots" as I call them on the brake rod I don't know were they mount and don't know what they look like. I will have to make something to fit and work, because they are not being reproduced just want something that is close and will work. If somebody could post a picture of what they look like and the position on frame that would be great! Thanks Robert DeBord
 
Thanks Ray64, yes I am looking for the brackets and they are not being reproduced that I know of mine are completely missing just thought somebody may post a picture of what one looks like so as to make some and were(location on frame) they bolt to on frame. Thanks Robert DeBord
 
Not the best photo..

CIMG2900.jpg
 
Thanks Russ/40 that is just what I needed know exactly where that is on the frame those are if I am not mistaken cut or punched out of the center cross member under the seat(same pattern as hole) I read somewhere that was what this metal was punched out for. Thanks for the picture just what I needed, Robert DeBord
 
DeBordEngineMan said:
Thanks Russ/40 that is just what I needed know exactly where that is on the frame those are if I am not mistaken cut or punched out of the center cross member under the seat(same pattern as hole) I read somewhere that was what this metal was punched out for. Thanks for the picture just what I needed, Robert DeBord
Click to expand...

Use the motor mount pad for reference. The object on top of the frame rail is a temporary mount for my gas can. Here is another more distant photo for reference.

CIMG2827.jpg
 
You must log in or register to reply here.
Back
Top