Need instructions for a KWWilson V126

[BUBBAS IGNITION]

Help I need the instruction sheets for the KW Wilson V126 distributor tool. Picked one up today , thanks in advance..

 

[40larry]

Jim:
Is your box the early wood style v126 or the later red metal box style. The instructions are different for the two. I have the instructions for the later red metal unit......larry

 

[TerryOH]

I will send you a scan of the metal box type instructions also. The instructions are only 4 pages long. You can decide which to use Larry's or mine.

 

[BUBBAS IGNITION]

Early wood box.......

 

[naijkee]

I will send you a scan of the metal box type instructions also. The instructions are only 4 pages long. You can decide which to use Larry's or mine.

Hi! Would you like to email me the instructions also? Thanks! / Niklas

 

[Hoop]

Oops ... old post.

 

[alanwoodieman]

from experience there is a little "art" to do with this box, but very accurate for the time that it was in use

 

[FlatheadTed]

Its simple (1) put the timing peg in the hole that will line up the mark /4Deg crank at the right of that is another mark ,(2)set at the high side of that ,light goes of light comes on


I have a machine similar to Bubbas Alan but mines a Vane, I always use the KRW fixture or servex to the get correct initial advance 4 degrees crank.Set the points wider on the firing side as that's the one that burns ,(Right side facing the Radiator) ,again !!

 

[BUBBAS IGNITION]

And everyone knows this post was a May of 2016 ?????

 

[Mike in AZ]

What? You don’t still need the instructions?? Lol. Mike

 

[alanwoodieman]

what!! we can't have fun with the distributor gura? sometimes even the experts need to knocked down a peg or two

 

[FlatheadTed]

HaHa sorry ,